NEC Bull NovaScale R620 User Manual page 216

System Configuration
System Configuration contains the following information:
Quick dump that is harvested at the same time of system reboot.
Select the [Enable] radio button to obtain quick dump at a system crash.
This function is enabled when "Complete memory dump" is set on Windows setting. When a quick dump cannot be
produced, a dump is produced by the standard dump function.
Automatic firmware update.
Select the [Enable] radio button to enable automatic firmware update. When this item is enabled and when one module
is started, the firmware (System BIOS) of the other module started later will be automatically updated to the one that is
already running if it is old.
Automatic module start.
Select the [Enable] radio button to enable the automatic module start. When this item is enabled and when the server is
running in the simplex mode with one module, if the other module is inserted to the chassis, it will be automatically
started and modules will become duplex.
The module POWER switch of the server is always enabled regardless of this setting. (The module stopped by the
module POWER switch can be started even when this setting is disabled.)
The following buttons are displayed for System Configuration:
Item
Apply
Restore Defaults
These operations cannot be performed while collecting dump or updating firmware. Wait until such processing is
finished to perform the operations in the table.
Module#n
Module contains the following information:
Item
Device
Status
CPU Module (ID:n/m)
CPU Module contains the following information:
Item
Status
NovaScale R620 User Guide
Applies the system configuration to the server
Resets the system configuration of the server to the default.
CPU module name and PCI module name
Status of the CPU module and the PCI module
Status of the CPU module
Description
Description
Description
5-42