Expressbuilder Top Menu - NEC Bull NovaScale R620 User Manual

EXPRESSBUILDER Top Menu

The EXPRESSBUILDER top menu is used for the setup of hardware and the setup and installation of OS.
Start
Start the EXPRESSBUILDER top menu following the procedure below:
Turn on the powers of peripherals and the power of the server in this order.
1.
Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
2.
After the CD-ROM is inserted, reset the system (by pressing Ctrl + Alt + Delete) or turn off the power and then
3.
on again to restart the server.
The system is activated from the CD-ROM to start the EXPRESSBUILDER.
After the EXPRESSBUILDER is started, the EXPRESSBUILDER top menu shown below appears.
A
B
C
A Express Setup
Performs various automatic setup operations including settings of internal parameters and states of hardware
and installations of Windows Server 2003 Enterprise Edition and various utilities. Select this setup procedure if
hard disks are used in a partition different from that defined at the purchase, or if OS is reinstalled.
B Tools
Starts each of the utilities stored in the EXPRESSBUILDER individually to allow the operator to provide setup.
Enables the setup without influence of installed OS.
C Help
Describes the EXPRESSBUILDER. We recommend you to read through the help before the setup.
D Exit
The EXPRESSBUILDER termination screen appears.
NovaScale R620 User Guide
D
5-3