Tesla Smart Robot Vacuum Cleaner Laser AI200 User Manual page 16

Reset the Wi-Fi settings
If your mobile phone fails to connect to the vacuum cleaner due to reasons such
as change of router settings and password forgotten, re-pair the vacuum cleaner
with the mobile phone according to the Wi-Fi connection instructions.
Tip:
If the vacuum cleaner is in wait-to-connect state for more than 2 minutes, its Wi-Fi
function is automatically disabled. To reconnect the vacuum cleaner to your mobi-
le phone, reset the Wi-Fi settings.
PIN N GO
You can use the mobile app to specify a target point on the map. The vacuum
cleaner will automatically plan the route and move to the specified point. If you
specify a target point in the app when the vacuum cleaner is in standby or pause
state, the vacuum cleaner will clean the 1.6mx1.6m square zone centered on this
point. After cleaning, the vacuum cleaner will automatically return to the starting
point and stop working.
Tip:
If you activate partial cleaning when the vacuum cleaner is in pause state, the
current cleaning task will be stopped.
1,6 m
Set a restricted zone or virtual wall
You can use the mobile app to set a restricted zone or virtual wall. After the setting
is completed, the vacuum cleaner will not enter the restricted zone or cross the
virtual wall for cleaning.
Tips:
•Before using this function, you need to enable the map save mode for the va-
cuum cleaner in the mobile app.
•This function is only used to divide cleaning zones, but cannot be used to block
dangerous zones.
•If the vacuum cleaner is moved or there are significant changes in the home
environment, the map may become invalid and the settings of the virtual wall or
restricted zone may be lost.
Restricted
zone for
mopping
Real-time map update
Cleaning record viewing
Robot voice changing
Robot positioning
Tip:
The functions and details of the app may change slightly due to continuous deve-
lopment and upgrade of the app. The specific functions and details of the app are
subject to the actual version.
16
Virtual wall
Restricted
zone for
cleaning
Volume adjustment
Map management
Firmware update
Robot status viewing