Tesla Smart Robot Vacuum Cleaner Laser AI200 User Manual page 15

Pause cleaning
If you need to add water to the water tank or wash the mopping cloth while the va-
cuum cleaner is working, press the
tton to continue cleaning, or press the
and stop the current cleaning task.
Tip:
In pause state, if the vacuum cleaner returns to the docking station for charging,
the current cleaning task is stopped.
Enter the sleep mode
If no operation is performed in 10 minutes, the vacuum cleaner automatically en-
ters the sleep mode, and the power indicator blinks every several seconds. In sleep
mode, you can press any button to wake up the vacuum cleaner.
Tips:
•When the vacuum cleaner is being charged at the docking station, it cannot enter
the sleep mode.
•If the sleep time exceeds 12 hours, the vacuum cleaner automatically powers off
Charge the vacuum cleaner
Auto mode: After completing cleaning, the vacuum cleaner automatically returns
to the docking station for charging.
Manual mode: In pause state, you can press the
to docking station" mode.
When the vacuum cleaner is being charged, the power indicator blinks in bre-
athing manner.
button to pause. You can press the
button to return to the docking station
button to activate the „Return
Tip:
If the vacuum cleaner fails to find the docking station, it automatically returns to
the starting point. In this case, you need to manually put the vacuum cleaner back
bu-
to the docking station.
Faulty state
If the vacuum cleaner encounters a fault while working, the power indicator blinks
quickly in red, and a voice prompt is generated. For details about troubleshooting
method, see „Troubleshooting".
Tips:
•In faulty state, if no operation is performed in 10 minutes, the vacuum cleaner
automatically enters the sleep mode.
•In faulty state, if the vacuum cleaner returns to the docking station for charging,
the current cleaning task is stopped.
15
EN