Control Ball; Description; Function; Gemü Conexo - GEM B22 Operating Instructions Manual

3.3 Control ball

Control ball Code U
30°
Note: The control ball cannot be retrofitted to standard 2/2-
way bodies at a later date.

3.4 Description

The GEMÜ B22 3-piece 2/2-way metal ball valve is manually
operated. It has a plastic sleeved hand lever with a locking
device. The seat seal is made of PTFE.

3.5 Function

The GEMÜ B22 2/2-way ball valve is made of metal and is
equipped with a plastic sleeved hand lever and a stainless
steel top flange.
The ball valve can be continuously open or closed.
The position of the ball valve can be secured using a suitable
lock (e.g. padlock). This lock is not included in the scope of
delivery.
www.gemu-group.com
Code Y Code W
60°
90°
35 / 60
4 GEMÜ CONEXO
The interaction of valve components that are equipped with
RFID chips and an associated IT infrastructure actively in-
crease process reliability.
Thanks to serialization, every valve and every relevant valve
component such as the body, actuator or diaphragm, and
even automation components, can be clearly traced and read
using the CONEXO pen RFID reader. The CONEXO app, which
can be installed on mobile devices, not only facilitates and im-
proves the "installation qualification" process, but also makes
the maintenance process much more transparent and easier
to document. The app actively guides the maintenance techni-
cian through the maintenance schedule and directly provides
him with all the information assigned to the valve, such as
test reports, testing documentation and maintenance histor-
ies. The CONEXO portal acts as a central element, helping to
collect, manage and process all data.
For further information on GEMÜ CONEXO please visit:
www.gemu-group.com/conexo
Installing the RFID chip
In the corresponding design with CONEXO, this product has
an RFID chip (1) for electronic recognition. The position of the
RFID chip can be seen below.
4 GEMÜ CONEXO
1
GEMÜ B22