Table of Contents
Advertisement
3.4.10 Typematic Rate Setting
The typematic rate determines the characters per second accepted by
the computer. The Typematic Rate setting enables or disables the
typematic rate.
3.4.11 Typematic Rate (Chars/Sec)
BIOS accepts the following input values (characters/second) for
typematic rate: 6, 8, 10, 12, 15, 20, 24, 30.
3.4.12 Typematic Delay (msec)
Typematic delay is the time interval between the appearance of the
first and second characters, when holding down a key. The input
values for this category are: 250, 500, 750, 1000 (msec).
3.4.13 Security Option
This setting determines whether the system will boot up if the
password is denied. Access to Setup is, however, always limited.
System
The system will not boot, and access to Setup will be
denied if the correct password is not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.
Note:
To disable security, select "PASSWORD SETTING"
in the main menu. At this point, you will be asked to
enter a password. Simply press <Enter> to disable
security. When security is disabled, the system will
boot, and you can enter Setup freely.
3.4.14 OS Select for DRAM > 64 MB
This setting is under the OS/2 system.
Chapter 3 Award BIOS Setup
37
Advertisement
Table of Contents
