Mbox600 Medical Computer Cleaning And Disinfecting - AXIOMTEK mBOX600 User Manual

mBOX600 Medical Computer Cleaning and
3.1 mBOX600 Medical Computer Cleaning and
Disinfecting
During normal use of the mBOX600, the device may become dirty and should be
regularly cleaned.
Steps:
1. Prepare cleaning fluid as below list.
2. Wipe the mBOX600 with a clean antistatic cloth that has been moistened in the
cleaning solution.
3. Wipe thoroughly with a clean antistatic cloth.
Cleaning: Use a soft/non-abrasive cloth moistened with water to clean the enclosure.
Caution!
◼ Do not immerse or rinse the AMIS or its peripherals. If you accidentally spill liquid
on the device, disconnect the unit from the power source. Contact your Biomed
Department regarding the continued safety of the unit before placing it back in
operation-Do not spray cleaning agent on the chassis.
◼ Do not use disinfectants that contain phenol.
◼ Do not autoclave or clean the AMIS or its peripherals with strong aromatic,
chlorinated, ketone, ether, or ether solvents, sharp tools or abrasives. Never immerse
electrical connectors in water or other liquids.

mBOX600 Medical Computer Cleaning and Disinfecting

mBOX600 User's Manual
Section 3
Disinfecting
9