Using The Serveraid Configuration Programs - IBM System x3800 Manual

Note: The server does not support changing the network boot protocol or
specifying the startup order of devices through the PXE boot agent utility program.
To start the PXE boot agent utility program, complete the following steps:
1. Turn on the server.
2. When the Initializing Intel (R) Boot Agent Version X.X.XX PXE 2.0 Build
3. To select a choice from the menu, use the arrow keys and press Enter.
4. To change the settings of the selected items, follow the instructions on the

Using the ServeRAID configuration programs

A ServeRAID controller enables you to configure multiple physical hard disk drives
to operate as logical drives in a disk array. The controller comes with a CD that
contains the ServeRAID Manager program and the ServeRAID Mini-Configuration
program, which you can use to configure the ServeRAID controller. For information
about these programs, see the documentation that comes with the ServeRAID
controller and the User's Guide on the IBM Documentation CD. If the server comes
with an operating system installed, such as Microsoft Windows 2000 Datacenter
Server, see the software documentation that comes with the server for configuration
information.
XXX (WfM 2.0) prompt appears, press Ctrl+S. You have 2 seconds (by default)
to press Ctrl+S after the prompt appears. If the prompt does not appear, use the
Configuration/Setup Utility program to enable the Ethernet PXE/DHCP option.
screen.
Chapter 5. Configuration information and instructions
165