Replacing The Power Backplane - IBM System x3800 Manual

3. Remove the front cover (tower model only), top cover, and bezel (see
4. Remove the power-supply sleeve (see "Removing the power-supply sleeve" on
5. Lift the power backplane off the rear of the power-supply sleeve.
6. If you are instructed to return the power backplane, follow all packaging

Replacing the power backplane

To install the replacement power backplane, complete the following steps:
1. Align the power backplane with the guides on the rear of the power-supply
2. Install the power-supply sleeve and the power supplies in the server (see
3. Install the top cover, front cover (tower model only), and bezel (see "Replacing
4. Connect the cables and power cords (see "Connecting the cables" on page 118
5. Turn on all attached devices and the server.
156
IBM System x3800 Type 8865: Problem Determination and Service Guide
"Removing the top cover, bezel, and front cover" on page 119).
page 154).
instructions, and use any packaging materials for shipping that are supplied to
you.
sleeve.
"Removing the power-supply sleeve" on page 154).
the top cover, bezel, and front cover" on page 121).
for cabling instructions).