IBM System x3800 Manual page 136

5. Lift the cover-release latch. The cover slides to the rear approximately 13 mm
6. Press on the bezel retention tabs on both sides of the bezel, and pull the top of
7. Lift up the bezel to release the tabs at the bottom edge of the bezel.
8. If you are instructed to return the top cover, front cover, and bezel, follow all
120
IBM System x3800 Type 8865: Problem Determination and Service Guide
Top cover
(0.5 inch). Lift the top cover off the server.
Bezel
the bezel slightly away from the server.
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
Cover release
latch