Enerzone EB00032 Installation And Operation Manual page 45

Step 1:
Start by taking out the four firebricks on the right hand side of the firebox then remove the cotter
pins and the secondary air tubes from the wood fire making sure to identify them so they can be
reinstalled in the same location.
Step 2:
Put a piece of ceramic wool insulation on top of the first baffle the notch facing down (as per the
right hand side image), insert the two parts into the wood fire and over the right and left
secondary air channel. Then push the baffle and its insulation against the firebox's back wall.
45
Solution 3.4 Installation and Operation Manual