Table of Contents
Advertisement
CONSTRUCTIONS AND CLEARANCES FACTORS FOR APPLIANCES HEAT SHIELDS
HEAT SHIELD CONSTRUCTIONS
Single layer of continuous material
Single layer of continuous material
NOTES:
1- Masonry may be used as a heat shield material.
2- Where heat shields are used to reduce appliance clearance dimensions, additional flue
shielding may also be required. Refer to AS/NZS 2918:2001.
Solution 3.4 Installation and Operation Manual
WHICH ARE MORE THAN 45
o
OFF THE VERTICAL
Minimum air gap
dimensions (mm)
12
25
Clearances factor
0.80
0.60
33
Advertisement
Table of Contents
