Table of Contents
Advertisement
6. Pull the blade server out of the bay. Spring-loaded doors farther back in the
7. Carefully lay the blade server on a flat, static-protective surface, with the cover
8. Place either a blade filler or another blade server in the bay within 1 minute.
Installing the blade server in a BladeCenter unit
Install the blade server in a BladeCenter unit to use the blade server.
Release handles
(open)
Figure 7. Installing the blade server in a BladeCenter unit
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade server cover before installing the blade server.
Perform the following procedure to install a blade server in a BladeCenter unit.
240
JS22 Type 7998: Problem Determination and Service Guide
bay move into place to cover the bay temporarily.
side up.
The recessed spring-loaded doors move out of the way as you insert the blade
server or filler blade.
1. Go to http://www.ibm.com/systems/support/ to download the latest
firmware for the blade server.
Download the firmware so that you can use it later to update the blade server
after you start it.
Advertisement
Table of Contents
