Fuji Xerox ApeosPort-VI C7771 Quick Reference page 96

5 Maintenance
2
Grasp the handle and pull out the staple
cartridge holder to the right, towards you.
3
Take the staple cartridge out of the finisher.
Note
4
Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
5
5
Insert the front side of the new staple case into
the staple cartridge (1), and then push the rear
side into the cartridge (2).
6
Push the staple cartridge into the finisher until it
clicks into place.
7
Close the finisher front cover.
Note
96
• The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of
the finisher.
• If the front cover is not closed completely, a message appears and the machine will remain paused.