Fuji Xerox ApeosPort-VI C7771 Quick Reference page 38

2 Product Overview
Left side and rear views of the machine
This view varies depending on
the model you use.
2
No. Component
1 Upper left cover
2 Bottom left cover
3 Adjusting foot
4 RESET button
(ApeosPort-VI C7771/C6671,
DocuCentre-VI C7771/
C6671 only)
5 RESET button
6 Rear right cover
7 Ethernet interface connector
8 USB 3.0 interface connector
(optional)
9 USB 2.0 interface connector
10 Secondary Ethernet
connector (optional)
38
6
10
9
8
7
5
4
Open this cover by pressing the release lever to clear paper jams.
Open this cover to clear paper jams. When Tray 6 is installed, open this cover
after moving Tray 6 to the left.
Prevents the machine from toppling over. Move the machine to its
installation site and then rotate this adjuster in clockwise direction until it
touches a floor.
Automatically switches the machine off when a current leakage is detected.
Automatically switches the machine off when a current leakage is detected.
Make sure that this cover is attached. Open this cover when connecting an
interface cable.
Connects to a network cable.
Connects to the cable of the Memory Card Reader or a USB memory device.
Connects to the cable of the Memory Card Reader or a USB memory device.
Connects to a network cable. Can be used as Gigabit Ethernet interface
connector.
Function
1
2
3