Fuji Xerox ApeosPort-VI C7771 Quick Reference page 63

2
Load the document face up (when the
document is 2-sided, load the front side up) in
the center of the document feeder.
Note
3
Adjust the document guides to match the size of
the document loaded.
4
Raise the document stopper.
Document Glass
The document glass supports a single sheet, a book, or other similar documents with size
from 15 x 15 mm to 297 x 432 mm (Standard size: A3, 11 x 17").
Important • Always close the document cover after using the document glass.
The document glass automatically detects standard size documents. For non-standard size
documents, enter the size on the [Original Size] screen.
CAUTION
Do not apply excessive force to hold thick document on the document glass. It may
break the glass and cause injuries.
1
Open the document cover.
Important • Make sure that the touch screen is active, and
• The Confirmation indicator lights up when the
document is loaded correctly. If the indicator
does not light, load the document again.
then load a document. Otherwise, the machine
may not properly detect the document size.
Copying Procedure
Confirmation indicator
3
63