Jolly Mec CULT 8 kW UP Instructions For Installation, Use And Maintenance Manual page 12

The owner is fully and exclusively liable for stove demolition and disposal according to laws in force in his/her country regarding safety,
respect and protection of the environment. At the end of its useful life, the product must not be disposed of together with urban waste.
It can be delivered to the appropriate differentiated collection centres set up by the municipal administrations, or to retailers that provide
this service. Differentiated product disposal allows you to avoid possible negative consequences for the environment and health, deriving
from its inappropriate disposal, and allows you to recover the materials of which it is composed in order to obtain significant energy and
resource savings.
The following table and the related exploded view to which it refers highlight the main components that can be found in the appliance
and the indications for their correct separation and disposal at the end of their life.
More specifically, electrical and electronic components must be separated and disposed of at authorised disposal facilities, in compliance
with European Directive 2012/19/EU and relevant national transpositions.
A. EXTERNAL CLADDING
If present, dispose of separately as per type of material:
- Metal
- Glass
- Tiles or ceramics
- Stone
B. GLASS DOORS
If present, dispose of separately as per type of material:
- Glass ceramic (fire door): dispose of in
aggregates or mixed waste
- Tempered glass ( furnace door): dispose of in
glass
E. METAL STRUCTURE
Dispose of separately into metal
F. NON-RECYCLABLE COMPONENTS
I.e: Seals, hoses made of rubber, silicone or fibres.
Dispose of in mixed waste
12
END-OF-LIFE DISPOSAL OF THE EQUIPMENT COMPONENTS
( REGULATION (EU) 2015/1185 - Annex II - par. 3 - a) - 3) )
INSTRUCTIONS FOR CORRECT PRODUCT DISPOSAL
C. INTERNAL CLADDING
If present, dispose of separately as per type of material:
- Metal
- Refractory materials
- Insulation panels
- Vermiculite
- Insulation, vermiculite and refractory materials
that have come into contact with flame or flue gases
(dispose of in mixed waste)
D. ELECTRICAL AND ELECTRONIC COMPONENTS
Wiring, motors, fans, circulators, displays, sensors, spark
plugs, electronic boards.
Dispose of separately at authorised collection facilities in
compliance with the WEEE Directive 2012/19/EU.
G. HYDRAULIC COMPONENTS
Pipes, fittings, expansion tank, valves.
If present, dispose of separately as per type of material:
- Copper
- Brass
- Steel
Other materials