Table of Contents
Advertisement
The correct temperature
Setting the temperature
Touch the temperature display.
The previously set temperature will
appear.
-18
°C
OK
Use the and arrows to set a
higher or lower temperature.
Touch
after setting the
OK
temperature to confirm your entry.
Or wait approximately 8 seconds
after the last touch of a sensor. The
temperature will then be adopted
automatically.
Useful tip: The newly set temperature
can also be confirmed and adopted by
closing the appliance door.
The temperature display will change to
the current temperature in the
appliance.
26
Temperature range
The temperature can be adjusted from
-14 °C to -28 °C.
Useful tip: If you have adjusted the
temperature, wait for approx. 6 hours
if the appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display. It will take this long for an
accurate reading to be given.
If, after this time, the temperature is
still too high or too low, adjust it
again.
Advertisement
Table of Contents
