Table of Contents
Advertisement
The correct temperature
Temperature display
In normal operation, the temperature
display shows the current average
refrigerator section temperature
inside the refrigeration appliance.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this
temperature to then be shown as a
constant temperature on the display.
Setting the temperature
Touch the OK sensor control on the
control panel.
will appear in the display.
Touch OK.
Use the and sensor controls to
change the temperature.
Touch OK.
The temperature display changes back
to the actual temperature that is
currently in the refrigeration appliance.
Possible temperature settings
- Refrigerator section: 2 to 9 °C
42
If you change the temperature
setting:
check the temperature display after a
few hours. It will take this long for the
appliance to give an accurate
reading.
- Wait for approx. 6 hours if the
refrigeration appliance is not very full
- Wait for approx. 24 hours if the
refrigeration appliance is full
If, after this time, the temperature is still
too high or too low:
Adjust the temperature again.
Advertisement
Table of Contents
