Table of Contents
Advertisement
Problem solving guide
With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
To prevent cold from escaping, avoid opening the appliance door until the fault
has been corrected.
Problem
The appliance is not
getting cold and the
interior lighting does
not come on when the
machine door is
opened.
The compressor runs
continuously.
54
Possible cause and remedy
The appliance is not switched on.
Switch the appliance on.
The plug is not properly inserted into the socket.
Insert the plug into the socket correctly.
The mains circuit breaker has tripped. There could be
a fault with the appliance, the household electrical
wiring or another electrical appliance.
Contact a qualified electrician or Miele.
This is not a fault. To save energy, the compressor
runs at a lower speed when less cooling is required.
This increases the running time of the compressor.
Advertisement
Table of Contents
