Table of Contents
Advertisement
Installation
Now position the trim along the
top of the appliance so that it sits
flush with the corners of the
appliance and then carefully work the
trim into the groove.
Useful tip: Press both ridges along the
entire length of the trim together. This
makes it easier to fit the trim into the
gap.
Place the cover into position at the
top on the front of the appliance.
Then place the cover into position
at the bottom on the front of the
appliance.
84
Connect the side-by-side
combination to the mains as
described in the operating and
installation instructions of the
individual appliance.
Appliances with an ice cube maker:
Connect the appliance to the mains
water supply as described in "Water
connection".
Advertisement
Table of Contents
