Table of Contents
Advertisement
Water connection
Information about the water supply
Risk of injury and damage due to
incorrect connection.
Failing to connect the appliance
correctly can result in personal injury
and/or material damage.
The appliance may only be
connected to the water supply by a
suitably qualified technician.
Disconnect the refrigeration
appliance from the power supply
before connecting it to the water
supply.
Turn off the tap before connecting
the refrigeration appliance to the
mains water.
Danger to health and property
due to contaminated water.
The quality of the water used must
conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
Connect the refrigeration appliance
to the drinking water supply.
This appliance meets the requirements
of IEC 61770 and EN 61770.
Connection to the water supply must
comply with the applicable
regulations in the country where the
appliance is being installed. All units
and systems used to supply water to
the refrigeration appliance must also
comply with the applicable
regulations in the respective country.
The appliance is only suitable for
connection to a cold water line,
which
– is directly connected to the fresh
water mains in order to ensure
sufficient circulation and therefore
good water quality.
Avoid connection to a water supply
in which the water might stagnate.
This can affect the taste of water and
ice cubes.
– withstands the operating pressure.
– complies with hygiene regulations.
The water pressure must be between
1.5 and 6 bar (150 and 600 kPa).
Only use the stainless steel hose
supplied. Old or used hoses must
not be connected to the appliance.
The stainless steel hose must not be
shortened, extended or replaced by
another hose.
The stainless steel hose must only
be replaced by an original Miele
spare part. A stainless steel hose
which is suitable for use with
drinking water is available to order
from Miele (see back cover for
contact details).
A tap must be provided between the
stainless steel hose and the mains
water supply to ensure that the water
supply can be shut off if necessary.
The tap should be easily accessible
after the appliance has been built in.
Installation
97
Advertisement
Table of Contents
