Table of Contents
Advertisement
The correct temperature
Temperature display
In normal operation, the temperature
display shows the current mean
temperature in the refrigerator.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this
temperature to then be shown
constantly in the display.
Setting the temperature
Touch the OK sensor on the control
panel.
appears in the display.
Touch OK.
Use the and sensors to change
the temperature.
Touch OK.
The temperature display will then
change back to the current temperature
in the refrigeration appliance.
Possible temperature settings
- Refrigerator section: 2 to 9 °C
42
If you change the temperature
setting:
Check the temperature display after a
few hours. It will take this long for an
accurate reading to be given.
- Wait for approx. 6 hours if the
refrigeration appliance is not very full.
- Wait for approx. 24 hours if the
refrigeration appliance is full.
If, after this time, the temperature is still
too high or too low:
Adjust the temperature again.
Advertisement
Table of Contents
