Table of Contents
Advertisement
Temperature and door alarm
The flashing appliance has been fitted
with a warning system which ensures
that the temperature in the freezer
cannot rise unnoticed and to avoid
energy being wasted if the door is left
open.
Temperature alarm
Health risk due to consumption
of spoiled food.
If the temperature in the freezer
remains above -18 °C for a long
time, the frozen goods can start to
defrost. This shortens the shelf life of
the food.
Check whether the frozen food has
started to defrost. If it has, check
that the food is safe to use and if it
is, use it as soon as possible or cook
it before freezing it again.
If the temperature in the freezer
becomes too warm,
in the temperature display. An alarm will
also sound until the cause of the alarm
is rectified or the alarm is switched off.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
The temperature alarm is only
displayed on the start screen and not
when selecting a setting.
A temperature alarm is displayed
before an existing door alarm.
28
will light up red
The acoustic and visual signals will be
activated if:
– The appliance is switched on and the
temperature in the appliance differs
greatly from the set temperature.
– A lot of warm room air enters the
freezer as you are rearranging or
taking out frozen goods.
– You are freezing large amounts of
food at once.
– You are freezing warm food.
– There was a power outage.
– The appliance has a fault.
The alarm will stop and
as soon as the temperature has
dropped down to the correct level
again.
Switching the temperature alarm off
early and checking the warmest
temperature
You can switch the alarm off early if you
wish. You can also call up the warmest
temperature that occurred in the freezer.
Touch
.
The fault message is confirmed and the
alarm will stop. The start screen
appears in the display: The warmest
temperature recorded in the freezer will
flash in the display for about 1 minute.
Then the current temperature in the
freezer will be displayed.
You can exit the flashing temperature
display early:
Touch the temperature display.
will go out
Advertisement
Table of Contents
