Table of Contents
Advertisement
Securing the soft-close mechanism
Open the door 90°.
Slide on the cover until it clicks
into position.
Push the hinged arm into the
opening on the door hinge.
Insert the pin into the door hinge
from above. Turn this with a
screwdriver (by approx. ¼ turn) until
both lugs on the pin click into
position correctly in the grooves.
Pull out the red safety device .
Useful tip: Keep the red safety device
in case you want to change the door
hinging again at a later date.
Fitting the upper covers
Fit the cover on the door hinge.
Fit the panel so that it clicks into
position.
Slide on the outer cover .
Close the appliance door.
Installation
95
Advertisement
Table of Contents
