Table of Contents
Advertisement
Problem solving guide
Message
lights up red in
the display, a
fault code F with
numbers appears
and an alarm
sounds.
60
Possible cause and remedy
There is a fault.
An appliance fault always has priority over any
settings which have just been selected. An appliance
fault has priority over any current door and/or
temperature alarms in the display.
To switch the alarm off touch via the display.
Call Miele.
To report the fault you need the fault code and also
the model number and serial number of your
appliance. You can access these via the display.
To do this touch in the display.
The appliance data required will be shown in the
display.
Confirm with
OK
In an emergency the appliance can be switched off
directly from the fault display.
Touch .
.
Advertisement
Table of Contents
