Shortcuts; Shortcut Example; If You Frequently Use A Certain Page; Example Of Operation - Hammond A-3 Playing Manual

To make programming quicker and easier, each button or tab on the control panel can be used to access the FUNCTION Mode Menu
page associated with that button instantaneously.
Pressing and holding any of the buttons on the top panel automatically "shortcuts" the display to the related FUNCTION Mode item.

SHORTCUT EXAMPLE:

LOCATE THE PERCUSSION FUNCTION Mode

IF YOU FREQUENTLY USE A CERTAIN PAGE...

You can assign a frequently-used FUNCTION Mode page to the [CONTROL] Touch Button for immediate access, even if that particu-
lar FUNCTION Mode is not normally accessible via a Shortcut.

EXAMPLE OF OPERATION:

REGISTER THE "DRAWBAR - PEDAL" PAGE
1
2
With holding

SHORTCUTS

Hold
UPPER PEDAL LOWER
BANK KEY PATCH
Press
If you wish to edit the Percussion settings, Press and Hold any
of the four Percussion Touch Tabs ([ON], [THIRD], [FAST], or
[SOFT]) and the display will immediately show the Percussion
FUNCTION Mode.
NOTE: You can change the Display Shortcut time. See page 125
for instructions on how to do this.
Display the page you want to "shortcut" to. For example, suppose
you want to access the PEDAL MODE page. To do this, do the
following:
1. Press and Hold the red [RECORD] Touch Button.
2. While holding the [RECORD] Touch Button, press the [CON-
TROL] Touch Button. The display will show,
"Recording Assign"
for about 2 seconds.
You will be able to access the desired page immediately by pressing
the [CONTROL] Touch Button.
HA<O> XK-5 Owner's Playing Guide
41