Basic Connections - Hammond A-3 Playing Manual

18
IMPORTANT: Make sure both the instrument and amplifier are "OFF" before connecting amplifiers or headphones.
Connect audio cables and accessories as shown below.
Tne XK-5 is not self-contained - an external amplifier/speaker system is required in order to hear the sound. However, if you connect
a set of stereo headphones to the HEADPHONES jack, you can hear the sound through the headphones even if an external amplifier
is not connected.
TO AC OUTLET
NOTE: The Expression Pedal and Foot Switch parameters must be set properly. For
more information, consult the [CONTROL] section of this Manual.
CAUTION
Do not place the instrument in direct sunlight, near heat sources, or in a hot location. Doing so may result in damage
to the instrument.
HA<O> XK-5 Owner's Playing Guide

BASIC CONNECTIONS

Foot Switch
FS-9H (optional)
Expression Pedal
EXP-50/50J/20/30
(optional)
Powered Speakers
(optional)