Troubleshooting - EGO POWER+ ZT5200E-L Manual

TROUBLESHOOTING

EN
PROBLEM
The mower fails to
drive when the two
steering levers are
pushed forward or
backward at the
beginning.
Steering level icon blinks
30
ZERO TURN RIDE-ON MOWER — ZT5200E-L
CAUSE
◾
The combined Ah of the
inserted batteries does not
meet the requirement.
◾
The parking brake pedal is
set in the braking position.
◾
The steering levers are not
in the open position when
starting the mower.
◾
The operator is not sitting on
the seat.
◾
The seat switch is not
connected correctly.
◾
Under extreme cold weather,
the driving function may not
start successfully due to the
low temperature protection.
SOLUTION
◾
In order to start this mower, use enough EGO
batteries following the instructions in section
"CHARGING" in this manual.
◾
Fully depress the parking brake pedal to release it
from the braking position.
◾
Return the steering levers to the open position and
restart the mower.
◾
Only when the operator is properly sitting on the
seat, can he or she operate the mower.
◾
Remove the battery from the mower and
disassemble the seat in the reverse order of the
instructions in section "INSTALLING THE SEAT" in
this manual to inspect the seat switch connection.
Reassemble the seat and follow the instructions in
"STARTING THE MOWER" to restart the mower to
see if the mower can be started. If not, contact a
qualified service technician for repair.
◾
Always store the mower and battery in warm
environment. Restart the mower when it is warmed
up. Please do not make repeated attempts under
extreme cold weather which may damage the
machine.