EGO POWER+ ZT5200E-L Manual page 66

PROBLEM CAUSE
◾
Steering levers require a
"reset".
◾
The electric controlling
components of the steering
levers are failed.
◾
The seat switch got
disconnected during driving
The mower stops
on a rough terrain.
driving.
◾
The parking-brake pedal
is depressed to slow down
the driving speed. Once
the parking-brake pedal is
depressed enough but not
to the parking position, the
mower will stop.
The driving speed/
◾
driving mode cannot This is a feature of the
be adjusted during mower for safe driving.
driving.
◾
The combined Ah of the
inserted batteries does not
meet the requirement.
◾
The PTO switch is not
pushed down when the
mower is stopped last time.
The mower fails to ◾
The mower is overloaded
start the blades when
at the moment the blades
the PTO switch is
starting, resulting in motor
engaged.
self-protection.
PTO Switch icon blinks ◾
Under extreme cold weather,
the blade motor may not
start successfully due to the
low temperature protection.
◾
The blade interferes with the
deformed mower deck.
SOLUTION
◾
Return the steering levers to the open position and
restart the mower.
◾
Contact a qualified service technician for repair.
◾
Remove the battery from the mower and disassemble
the seat in the reverse order of the instructions in
section "INSTALLING THE SEAT" in this manual to
inspect the seat switch connection. Reassemble the
seat and follow the instructions in "STARTING THE
MOWER" to restart the mower to see if the mower
can be started. If not, contact a qualified service
technician for repair.
◾
Follow the instructions in "STARTING THE MOWER"
to restart the mower.
◾
The function will activate only when the mower
wheels are stopped and the steering levers are open.
◾
In order to start this mower, use enough EGO
batteries following the instructions in section
"CHARGING" in this manual.
◾
Push the PTO switch downward and restart the
mower's blades.
◾
Start the mower grass cutting in lower blade speed
first and until the blades are getting successes
rotation, do not accelerate the blade speed as
needed.
◾
Always store the mower and battery in warm
environment. Restart the mower when it is warmed
up. Please do not make repeated attempts under
extreme cold weather which may damage the
machine.
◾
Contact a qualified service technician for repair.
ZERO TURN RIDE-ON MOWER — ZT5200E-L
EN
31