2.Printer Setup
Adjusting the position of the reflective sensor (movable)
Open the top cover.
1
2
Pull out the media by about 15 cm (5.91") and fold the media so that the black mark [1] at the
back side of the media will face upward.
[ 1 ]
[ 2 ]
Align the center of the reflective sensor [2] with the center line of the black mark.
3
The reflective sensor is movable from one end of the media to the other.
[ A ]
[A]: Range in which the reflective sensor can be moved
[ 2 ]
Adjusting the position of the media detection sensor 59