Toshiba BV410T-GS02-QM-S Owner's Manual page 21

2.Printer Setup
You can prevent the cable from being unplugged by passing the cable of the DC plug through the groove on the
bottom side.
Insert the cable into the groove in the order shown in the illustration below.
1
2
3
Connect the power cable [2] to the AC adapter [1].
2
[ 1 ]
[ 2 ]
If a power cable is not provided with this printer, purchase the correct one referring to the following.
 P.19 "When purchasing the power cable"
Preparing to use the printer 21