Table of Contents
Advertisement
2.Printer Setup
1
While pulling each of the right and left lock release portions [1] in the arrow direction, fully open
the top cover [2].
[ 1 ]
Push down the media damper (top).
2
Push down the media damper (top) gently. Holding or pulling the media damper (top) strongly could cause
malfunctions.
3
Open the ribbon cover.
If the ribbon core diameter is 25.4 mm (1"), mount the ribbon spooler attachment [2] on the
4
ribbon spooler [1].
[ 1 ]
The ribbon core diameter is either 25.4 mm (1") or 12.7 mm (0.5"). If the ribbon core diameter is 12.7 mm (0.5"),
do not use the ribbon spooler attachment.
54 Loading the ribbon (thermal transfer method)
[ 2 ]
[ 1 ]
[ 2 ]
Advertisement
Table of Contents
