Drive Indicators - xFusion Digital Technologies FusionServer CH242 V5 Manual

FusionServer CH242 V5 Compute Node
Technical White Paper

5.4.3 Drive Indicators

SAS/SATA Drive Indicators
Figure 5-12 SAS/SATA drive indicators
Table 5-5 Description of SAS/SATA drive indicators
Activity Indicator
(Green)
Off
Steady on
Blinking at 4 Hz
Steady on
Blinking at 1 Hz
Off
Steady on
M.2 FRU Indicators
Figure 5-13 M.2 FRU indicators
2022-08-12
Fault Indicator
(Yellow)
Off
Off
Off
Blinking at 1 Hz
Blinking at 1 Hz
Steady on
Steady on
5 Hardware Description
Description
The drive is not in position.
The drive is detected.
Data is being read or written normally, or
data on the primary drive is being rebuilt.
The drive is being located.
Data on the secondary drive is being rebuilt.
A member drive in the RAID array is
removed.
The drive is faulty.
27