Table of Contents
Advertisement
FusionServer CH242 V5 Compute Node
Technical White Paper
⚫
⚫
5.1.2 Indicators and Buttons
Indicator and Button Positions
Figure 5-2 Indicators and buttons on the front panel
1
3
Indicator and Button Descriptions
Table 5-1 Description of indicators and buttons on the front panel
Sign
2022-08-12
a: The drive slots support 2.5-inch SAS/SATA/NVMe drives and M.2 modules and
mixed configuration of them.
b: An M.2 module is a 2.5-inch drive module that consists of one M.2 adapter and two
M.2 FRUs.
Power button/indicator
Health status indicator
Indicator and
Button
Power
button/indicator
2
-
Description
Power indicator:
⚫
Off: The device is not powered on.
⚫
Steady green: The device is powered on.
⚫
Blinking yellow: The iBMC is starting. The power
button is locked and cannot be pressed. The iBMC
is started in about 1 minute, and then the power
indicator is steady yellow.
⚫
Steady yellow: The device is standby.
Power button:
⚫
When the device is powered on, you can press this
button to gracefully shut down the OS.
NOTE
For different OSs, you may need to shut down the OS as
prompted.
⚫
When the device is powered on, holding down
this button for 6 seconds will forcibly power off
5 Hardware Description
UID button/indicator
-
14
Advertisement
Table of Contents
