FusionServer G5500 V6 Server
Technical White Paper
5.1.2 Indicators and Buttons
Indicator and Button Positions
⚫
1
3
5
7
Indicator and Button Descriptions
Table 5-1 Indicators and buttons on the front panel
Silkscreen
2023-02-14
24 x 3.5" drive configuration
Figure 5-3 Indicators and buttons on the front panel
Fault diagnosis LED
Health status indicator
FlexIO card 1 presence
indicator
iBMC direct connect
management port indicator
Indicator and
Button
Fault
diagnosis LED
Power
button/indicato
r
2
4
6
-
Description
⚫
---: The device is operating properly.
⚫
Error code: A component is faulty.
For details about the error codes, see the
FusionServer G5500 Server iBMC Alarm
Handling.
Power indicator:
⚫
Off: The device is powered off.
⚫
Steady green: The device is powered on.
⚫
Blinking yellow: The iBMC is starting. The
power button is locked and cannot be
pressed. The iBMC is started in about 1
minute, and then the power indicator is steady
5 Hardware Description
Power button/indicator
UID button/indicator
FlexIO card 3 presence
indicator
-
19