1256E User Manual
Introduction
Set GPIB Parameters (e.g. address)
Set RS-232 Parameters (e.g. baud rate, parity)
Set Display Parameters (e.g. brightness, format,
Set Up Response To Trigger In Pulse
Save/Recall Switch States (flash memory)
Save/Recall Menu Preferences (flash memory)
Racal Instruments © 2002
USING the FRONT-PANEL CONTROLS
The front-panel controls allow you to use the main features of the
1256 without the use of a remote interface such as IEEE-488
(GPIB) or RS-232. This may be useful during initial setup or when
troubleshooting a system.
Table 3-1, Accessibility of Features lists the features of the
1256 and indicates their accessibility via remote interface and
front-panel controls.
Table 3-1, Accessibility of Features
Feature
Open/Close Relays
Write/View Digital Channels
Select Remote Interface
Set Ethernet Parameters
screen saver)
View Firmware Rev. Letter
Work With Scan Lists
Work With Include Lists
Work With Exclude Lists
Generate Trigger Out Pulse
Accessibility
Remote
Interface
•
•
•
•
•
•
•
•
•
Using the Front-Panel Controls 3-1
Chapter 3
Front-Panel
Controls
•
•
•
•
•
•
•
•
•
•