Appendix 1: Connecting The Blower With A Bx Wire - Enerzone DESTINATION 2.7 Installation And Operation Manual

APPENDIX 1: CONNECTING THE BLOWER WITH A BX WIRE

CAUTION RISK OF ELECTROCUTION.
All electrical connections should be performed by a certified electrician.
1. Remove the screws (B) and the plate (A). Disconnect the wires from the terminal block.
Unscrew the screws (D) and remove the plate (C).
2.
3. Install the sleeve (E) to protect the wires. The sleeve is in the insert owner's manual.
E
Page 40
D
C
B
A
Installation and Operation Manual - Destination 2.7 Insert