• Unscrew the two supports (B) of the refractory bricks from the sides. The stones can then be
removed in the order shown in Figure 12.
A
B
Figure 14 : Install the Combustion Chamber Bricks
3.3
Connecting the Blower With a BX Wire
2
Note: The images shown are for guidance only and may be different from your product, but
the assembly remains the same.
All electrical connections should be performed by a certified electrician.
1. Remove the screws (A) to remove the plate
(B) and gain access to the wires. Save the
screws for later.
2. Disconnect the black (C) and white (D)
wires.
3. Remove the ground screw (E) to remove
the green wire. Save the screw for later.
Page 18
3/8"
3
1
CAUTION RISK OF ELECTROCUTION.
2
B
2
1
Figure 15 : Stones scheme
C
D
E
Product Specification Manual - Destination 1.9
3/8"
3
2
A
B