Control Panel; Main Functions - Linde BOC Smootharc Advance MIG 425R Operating Manual

6.0 Control panel

Home Screen – Screen showing welding parameters and job mode
2T
JOB
SYN
68
A
8
6.1

Main functions

Adjusting Knob - Left
Adjusting Knob - Right
Name Description
Adjusting Knobs The control knobs are multi-function and are operated by rotating and
pressing. They are used to navigate around the screens to switch options and
functions and adjust parameter values.
Left
Rotate the left knob to toggle between options. Press knob for 5 secs
to show the pop-up box. Rotate the left knob again to select parameter items
and short press to confirm selection.
Right
Rotate the right knob to switch between Second SET and Main SET,
press it again to confirm the selection and enter the corresponding screen.
in the MIG/SYN welding interface, Long press (5 seconds) the right knob to
enter the Service screen.
Wire Inch Button Press and hold the Wire Inch Button on the power source or wire feeder
panel to start wire inch. Release the button to stop the wire inch.
During the wire inch, the INCH on the screen keeps flashing.
Gas Test Button Short press the Gas Test Button on the power source or wire feeder panel
to start gas testing. Press the button again to stop the gas test.
During the gas test, the GAS TEST on the screen keeps flashing.
Back Button Press this button to take you to Main Settings Screen or
back to home screen
0.9
Fe
0.80
mm
16.5
2.5
m/min
0
SAVE
BOC Smootharc Advance III MIG 425R & 555R Operating manual
Ar CO
V
Wire Inch Button
Gas Test Button
Back Button
15