Control Panel And Display; Control Panel - Linde BOC RAPTOR Operating Manual

5.0 Control Panel and Display

Control Panel of Raptor 180 TIG DC
5.1

Control Panel

Icon Name
Adjustment knob
Welding mode
button
Remote indicator
Menu button
14
Description
Rotate the knob directly to set welding current.
With the "menu button", rotate the knob to set pre-gas time, start
current, up-slope time, etc.
Used to switch the MMA and TIG mode.
The TIG mode includes TIG (AC) and TIG (DC)
The indicator lights up when the parameters are set by the digital
TIG torch or the foot control is connected.
MMA mode
Long press (3s): Open/close the VRD function.
Short press: switch the hot start current, hot start time and
arc force current.
TIG mode
Long press (3s): switch the 2T, 4T, and spot mode
Short press: switch the pre/post gas time, up-slope time/
down-slope time, start current, stop current, pulse
frequency, etc.