Home Screen Icons; Welding Parameter Icons - Linde BOC Smootharc Advance MIG 425R Operating Manual

16 BOC Smootharc Advance III MIG 425R & 555R Operating manual
Display Screen Functionality

6.2 Home Screen Icons

Icon Description
Welding mode:
Including MIG/SYN, MIG/Manual, TIG and MMA.
Welding method:
Including 2T, 2TS, 4S and Spot.
Material:
Including Fe, CuSi and Flux cored.
Wire diameter:
Including 0.8mm, 0.9mm, 1.0mm, 1.2mm and 1.6mm.
Note: Different machine models can use different wire diameters.
Gas:
Including Ar, CO
JOB options:
Including JOB 0 – JOB 9.
JOB 0 means no stored data. JOB 1– JOB 9 can store data.
If there is no data stored in JOB 1– JOB 9, it cannot be selected.
MIG/SYN
MIG/Manual
TIG
MMA
and Ar-CO .
2 2

6.3 Welding parameter Icons

Icon Description
Inductance, Range -50 to +50
ARC length voltage adjustment
Range -50 to +50
Wire feed speed
Plate thickness
Post-gas time
(Reserved function for TIG)
ARC force,
Range 0–250
The VRD function in MMA/TIG mode is turned on by
default, and it will be turned off automatically when
welding starts.
Air cooling. When the fan is working, it will be
displayed in green.
Water cooling.
Available on selected models only.
,
(Synergic mode only)