Table of Contents
Advertisement
6.0 Control panel and display
Control Panel of TIG 200 ACDC
6.1
Control Panel
Icon
Name
Adjustment knob
Welding mode button
MMA indicator
TIG indicator
Menu button
Description
Rotate the knob directly to set welding current.
With the "menu button", rotate the knob to set pre-gas time, start current, up-slope time, etc.
Used to switch the MMA and TIG mode
When the "MMA indicator" light is on, the machine is in the MMA mode.
When the "TIG indicator" light is on, the machine is in the TIG mode.
MMA mode
Long press (3s): Open/close the VRD function.
Short press: switch the hot start current, hot start time and force current.
TIG mode
Long press (3s): switch the 2T (HF), 4T (HF), spot (HF) and 2T (LIFT) mode
Short press: switch the pre/post gas time, up-slope time/down-slope time, start current, stop current,
pulse frequency, etc.
BOC Smootharc TIG 200 DC Operating Manual
31
Advertisement
Table of Contents
