Electrical Shock; User Responsibility - Linde BOC Smootharc Advance MIG 425R Operating Manual

1.4

Electrical shock

→ Never touch 'live' electrical parts
→ Always repair or replace worn or damaged parts
→ Disconnect power source before performing any maintenance or service
→ Earth all work materials
→ Never work in moist or damp areas
Avoid electric shock by:
→
Wearing dry insulated boots.
→
Wearing dry leather gloves.
→
Working on a dry insulated floor where possible.
1.5

User Responsibility

→
Read the Operating Manual prior to installation of this machine.
→
Unauthorised repairs to this equipment may endanger the technician and
operator and will void your warranty. Only qualified personnel approved
by BOC should perform repairs.
→ Always disconnect mains power before investigating
equipment malfunctions.
→ Parts that are broken, damaged, missing or worn should be
replaced immediately.
→ Equipment should be cleaned periodically.
BOC Smootharc Advance III MIG 425R & 555R Operating manual
BOC stock a huge range of personal protective equipment. This combined
with BOC's extensive Gas and Gear network ensures fast, reliable service
throughout the South Pacific.
STOP
PLEASE NOTE that under no circumstances should any equipment
or parts be altered or changed in any way from the standard
specification without written permission given by BOC. To do so
will void the Equipment Warranty.
Further information can be obtained from Weld Australia
Technical Note No.7.
Health and Safety Welding
Published by Weld Australia,
PO Box 6165 Silverwater NSW 2128
Phone (02) 9748 4443
7