Connection To The Connector - Mitsubishi Electric FR-A8NC Instruction Manual

3.1.2

Connection to the connector

Connect the CC-Link dedicated cable to the CC-Link communication connector.
NOTE
• When wiring cables to the inverter's RS-485 terminals while a plug-in option is mounted, take caution not to let the cables
touch the circuit board of the option or of the inverter. Otherwise, electromagnetic noises may cause malfunctions.
CAUTION
• Take caution not to subject the cables to stress.
• After wiring, wire offcuts must not be left in the inverter. Wire offcuts can cause an alarm, failure or malfunction.
26
WIRING
CC-Link
dedicated cable
CC-Link
communication
connector