Table of Contents
Advertisement
NOTE
• When Pr.541 = 1 (with sign)
When EEPROM write is specified with the RYE, write mode error (error code H01) will occur.
When concurrent execution of both RYD and RYE is enabled (when a value other than 0 is set in Pr.544) and both RYD and
RYE are turned on, RYD has precedence.
When power is turned on (inverter reset), the initial setting status of the sign bit is "positive" and the set frequency is "0 Hz".
(The motor does not operate at the frequency set before turning OFF the power (inverter reset).)
When set frequency is written with the instruction code of HED and HEE, the sign of the frequency command is not changed.
• Setting Pr.811 Set resolution switchover ="1 or 11" changes the increment from 1 r/min to 0.1 r/min. (Only for the FR-A800
series)
48
INVERTER SETTING
Advertisement
Table of Contents
