Table of Contents
Advertisement
CAUTION
Usage
As all parameters return to their initial values after Parameter clear or All parameter clear is performed, the needed parameters for operation
of the inverter and this product must be set again before the operation is started.
To avoid damage to this product due to static electricity, static electricity in your body must be discharged before you touch this product.
To maintain the security (confidentiality, integrity, and availability) of the inverter and the system against unauthorized access, DoS*1
attacks, computer viruses, and other cyberattacks from external devices via network, take appropriate measures such as firewalls, virtual
private networks (VPNs), and antivirus solutions. We shall have no responsibility or liability for any problems involving inverter trouble and
system trouble by DoS attacks, unauthorized access, computer viruses, and other cyberattacks.
Depending on the network environment, the inverter may not operate as intended due to delays or disconnection in communication.
Carefully consider what type of environment the inverter will be used in and any safety issues related to its use.
Maintenance, inspection and parts replacement
Do not carry out a megger (insulation resistance) test.
Disposal
This product must be treated as industrial waste.
*1 DoS: A denial-of-service (DoS) attack disrupts services by overloading systems or exploiting vulnerabilities, resulting in a denial-of-service (DoS) state.
General instruction
For clarity, illustrations in this Instruction Manual may be drawn with covers or safety guards removed. Ensure all covers and safety guards
are properly installed prior to starting operation.
3
Advertisement
Table of Contents
