Table of Contents
Advertisement
The page includes the following fields:
Object
VLAN Name
VLAN ID
Port
UnTag Member
Enable 802.1Q VLAN, the all ports on the switch belong to default VLAN, VID is 1. The
default VLAN can't be deleting.
Figure 4-4-6: 802.1Q VLAN Setting Interface Screenshot
Description
Use this optional field to specify a name for the VLAN. It can be up to 16
alphanumeric characters long, including blanks.
You can configure the ID number of the VLAN by this item. This field is used to
add VLANs one at a time.
The VLAN group ID and available range is 2-4094.
Indicate port 1 to port 10.
Packets forwarded by the interface are untagged.
Untag
Defines the interface as a tagged member of a VLAN. All packets
forwarded by the interface are tagged. The packets contain VLAN
Tag
information.
User's Manual of WGSW-2620HP
75
Advertisement
Table of Contents
