Table of Contents
Advertisement
The page includes the following fields:
Object
Sniffer Type:
Analysis (Monitoring) Port:
Monitor Port:
1
2
Figure 4-3-6: Port Sniffer Interface Screenshot
Description
Select a sniffer mode:
• Disable
• Rx
• Tx
• Both
It' means Analysis port can be used to see the traffic on another port you want to
monitor. You can connect Analysis port to LAN analyzer or netxray.
The port you want to monitor. The monitor port traffic will be copied to Analysis
port. You can select one monitor ports in the switch. User can choose which port
that they want to monitor in only one sniffer type.
When the Mirror Mode set to RX or TX and the Analysis Port be selected, the packets
to and from the Analysis Port will not be transmitted. The Analysis Port will accept only
COPPIED packets from the Monitored Port.
If you want to disable the function, you must select monitor port to none.
User's Manual of WGSW-2620HP
64
Advertisement
Table of Contents
