Table of Contents
Advertisement
The page includes the following fields:
IPv4 ACL
Object
Group ID
Action
VLAN
Packet Type
Src IP Address
Dst IP Address
IP Fragment
L4 Protocol
Protocol
Description
1 ~ 200
Permit / Deny.
Permit: Permit packet cross switch.
Deny: Drop packet.
Any / VID.
Any: Any VLAN id.
VID: 1~4094. A certain VLAN id.
IPv4 / Non-IPv4 / Binding
IPv4: Set Ipv4 packet field.
Non-IPv4: Set non-Ipv4 packet field.
Binding: Set binding entry.
Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
Any: Any IP address.
IP: A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Notice: This is not subnet mask.
Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
Any: Any IP address.
IP: A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Set this field if Packet Type is IPv4, else ignore.
Uncheck / Check
Uncheck: Not check IP fragment field.
Check: Check IP fragment field.
Set this field if Packet Type is IPv4, else ignore.
Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17)
Set this field if Packet Type is IPv4, else ignore.
0~255.
If protocol not find in L4 Protocol field, you can direct assign
number.
116
User's Manual of WGSW-2620HP
Default Vaule
Permit
Any
IPv4
Any
Any
Uncheck
Any
Advertisement
Table of Contents
